Finished Sewing the Clews on Spin #1

I finished up sewing the new clews on Spin #1.  Here's Clew #1:

The bobbin thread finished, so I had to restart at the edge of one of the panels:

Here's Clew #2:  I sewed on the red side as the panel edges were more visible then on the black side.

Next, I sewed sinew under the ring to keep it in place and I guess to strengthen the edge:

Here's the other side.

Here's a better shot of the tools I used:

And a closeup:

Next up is the stay tape!  That'll be another day.